P0022 means Intake Camshaft Position Timing Over-Retarded (Bank 2). The bank 2 intake camshaft is more retarded than the computer commanded. It is a generic OBD-II code, so the definition is the same on any make, but the most likely cause varies by engine; confirm with a scan tool and the service information for your vehicle before buying parts.
What P0022 means
The engine computer uses the crankshaft position sensor to know engine speed and piston position, and the camshaft sensors to know which stroke each cylinder is on. On engines with variable valve timing, oil-driven cam phasers rotate the camshafts relative to the crankshaft under the control of solenoids. Timing codes come from a sensor that cannot be read, or from a measured cam angle that does not match the commanded one, so oil level and condition, sensor signals and mechanical timing all need checking.
P0022 symptoms
- Check engine light
- Rough idle or stalling on some engines
- Reduced power or poor fuel economy
Common causes of P0022
- Low or dirty oil
- Sticking solenoid or clogged solenoid screen
- Worn cam phaser
- Stretched timing chain or worn guides
How to diagnose P0022
- Check oil level and condition, and confirm the oil viscosity matches the specification
- Check the bank 2 intake cam solenoid connector and wiring
- Watch commanded vs actual cam angle on a scan tool
- Test the solenoid’s resistance and operation with a bidirectional scan tool
Can you drive with P0022?
Usually short term; fix soon, because some causes (low oil, chain stretch) get worse.
P0022 tips
An over-retarded cam often means the phaser cannot get enough oil pressure to advance it. Check oil level and condition first, then the solenoid screen, before considering the phaser or chain.
Will P0022 clear itself?
If the fault stops, the computer turns off the check engine light by itself after several drive cycles without seeing it again, and the code stays in memory as history for a while. Clearing P0022 with a scan tool after a repair is fine, but if the cause is still there the code returns, sometimes within one drive. Disconnecting the battery also clears codes on most vehicles, but it erases learned fuel trims and idle settings as well.
Related codes
| Code | Meaning |
|---|---|
| P0020 | Intake Camshaft Position Actuator Circuit (Bank 2) |
| P0021 | Intake Camshaft Position Timing Over-Advanced or System Performance (Bank 2) |
| P0019 | Crankshaft Position – Camshaft Position Correlation (Bank 2 Sensor B) |
Guides that help
When it is more than a sensor
If a stretched chain has already jumped time and damaged valves, or low oil pressure has worn the engine, a repair can cost more than a replacement; see engine replacement cost and compare engines by code on our engines page.
Shipping is a flat $80.00 per order to US addresses, with 15-day free returns. Questions? Ask a parts specialist.