Skip to content

P0768 Code: Shift Solenoid D Electrical, Causes and Fixes

P0768 means Shift Solenoid D Electrical. Symptoms, common causes, how to diagnose it and whether it is safe to drive.

P0768 means Shift Solenoid D Electrical. The transmission computer has found an electrical fault in the shift solenoid D circuit, such as an open, a short or resistance out of range. It is a generic OBD-II code, so the definition is the same on any make, but the most likely cause varies by engine; confirm with a scan tool and the service information for your vehicle before buying parts.

What P0768 means

Electronically controlled automatics are run by a transmission control module (TCM), a separate box or part of the engine computer. It reads speed sensors, the range sensor and fluid temperature to decide when to shift, and drives solenoids that apply clutches and the torque converter clutch. Many basic code readers only show the generic P0700; a scan tool that reads the transmission module shows the specific fault. Check fluid level and condition first, since low or burnt fluid causes many transmission codes.

P0768 symptoms

  • Check engine light, often with limp mode
  • Missing gears, starting in the wrong gear or harsh shifts
  • Engine speed flaring between gears

Common causes of P0768

  • Open or shorted solenoid coil
  • Damaged internal harness or case connector
  • Fluid wicking into the connector
  • Wiring damage between the transmission and the computer

How to diagnose P0768

  1. Check transmission fluid level and condition first
  2. Read all transmission codes with a scan tool that reads the transmission module
  3. Check solenoid resistance at the case connector, then at the solenoid with the pan off
  4. Look for metal or friction debris in the pan

Can you drive with P0768?

Only as needed; driving in limp mode is meant to get you to a repair, not for daily use.

P0768 tips

Check the case connector for transmission fluid wicking into it; contaminated connectors are a common cause of electrical solenoid codes.

Will P0768 clear itself?

If the fault stops, the computer turns off the check engine light by itself after several drive cycles without seeing it again, and the code stays in memory as history for a while. Clearing P0768 with a scan tool after a repair is fine, but if the cause is still there the code returns, sometimes within one drive. Disconnecting the battery also clears codes on most vehicles, but it erases learned fuel trims and idle settings as well.

Related codes

Code Meaning
P0765 Shift Solenoid D
P0766 Shift Solenoid D Performance or Stuck Off
P0763 Shift Solenoid C Electrical

Guides that help

When it is more than a sensor

If the fault turns out to be internal (worn clutches, a failed converter or a damaged valve body), compare a rebuild with a replacement in transmission rebuild vs replacement and transmission replacement cost, identify your unit with what transmission do I have?, and browse our transmissions.

Shipping is a flat $80.00 per order to US addresses, with 15-day free returns. Questions? Ask a parts specialist.

Shop parts for your application

Select your vehicle and see only parts with catalog fitment.

Find the right part

Select your application
or search by number